Electroplating Diamond Drill Bit Glass Hole Saw
Item No.: EPCBR001
Application:
The electroplated diamond drill bits works great on marble, granite, ceramic, porcelain and glass tile and panel.
The diamond core bit with electroplating technology is designed for drilling holes in glass, tile, marble, ceramic etc.
The electroplated diamond hole saw is a must-have in your toolbox for bathroom/kitchen fixtures like faucet, shelves etc.
Features:
- Electroplating technology provides high diamond concentration and maximum diamond particle exposure which makes the diamond core bits do free and fast drilling.
- Electroplating diamond core bits provides smooth finish surface.
- Strong bonding and high concentration of diamond on the cutting edge makes it lasting long.
- Slot on the cutting edge is easy for chip removal and guarantee its fast cutting
- Holes on the shank is easy for water filling and chip removing.
- Please do wet drill which can last long the life of the diamond hole saw and reduce the thermal damage to the part being drilled to the least.
Size Available of these Glass Hole Cutter:
| Diameter |
Shank Size |
Cutting Depth |
Total Length |
| 6mm |
6mm |
/ |
55mm |
| 8mm |
6mm |
/ |
55mm |
| 10mm |
6mm |
30mm |
55mm |
| 12mm |
6mm |
30mm |
55mm |
| 14mm |
6mm |
30mm |
55mm |
| 16mm |
6mm |
30mm |
55mm |
| 18mm |
6mm |
30mm |
55mm |
| 20mm |
8mm |
30mm |
55mm |
| 22mm |
8mm |
30mm |
55mm |
| 25mm |
8mm |
30mm |
55mm |
| 28mm |
8mm |
30mm |
55mm |
| 30mm |
8mm |
30mm |
55mm |
| 32mm |
8mm |
30mm |
55mm |
| 35mm |
8mm |
30mm |
55mm |
| 38mm |
10mm |
30mm |
55mm |
| 40mm |
10mm |
30mm |
55mm |
| 42mm |
10mm |
30mm |
55mm |
| 45mm |
10mm |
30mm |
55mm |
| 50mm |
10mm |
30mm |
55mm |
| 55mm |
10mm |
30mm |
55mm |
| 60mm |
10mm |
30mm |
55mm |
| 65mm |
10mm |
30mm |
55mm |
| 70mm |
10mm |
30mm |
55mm |
| 75mm |
10mm |
30mm |
55mm |
| 80mm |
10mm |
30mm |
55mm |
| 85mm |
10mm |
30mm |
55mm |
| 90mm |
10mm |
30mm |
55mm |
| 100mm |
10mm |
30mm |
55mm |
Other size could be available upon request.
Machines for those electroplating diamond core bits:
| Bench drill |
Hand held drill |
| Cordless Drill |
Other equipment which can hold the shank |
How to use the diamond hole cutter properly to cut smoothly and long:
1. Start with 45 degree for get the position groove
2. Move the hole saw to verticle direction for the hole drilling(slightly shakes gonna make the drilling more fast).
Attention:
Do use water cooling during the cutting to extent it cutting life and protect the workpiece from burning.
Use for glass, ceramic, tile, marble etc and DO NOT use for toughened glass.
Wear personal protection during work
){kind=link}